Any time a toilet can suffer from blockages, then it will. Normally, whenever a toilet clogs you will simply grab the closest flange plunger and fix it. But what happens when you cannot do that? Perhaps you just moved into a brand new place. It does not matter why you do not have a plunger. What concerns is what you are going to do after that. Clearly, you will want to unblock the toilet even without your plunger. Thankfully, this is not as complicated (or gross) as you may think. In reality, there are some unexpectedly easy techniques to clear up even tough clogs without a plunger. Below are the ones you should decide to try first:
- Try pouring down hot water
To start with, get a big bucket of heated water. You have to keep in mind that you want hot, but not boiling water. Boiling water might crack the porcelain of the WC bowl. Instead, just fill a bucket with the hottest water your tap can provide. Put that water into the WC bowl until it is nearly whole and allow it to sit. The heat should help break up any solid waste enough for the toilet to clean it down. If this does not work, do not panic–just move ahead to the subsequent techniques. This is just the beginning
- Try using dish soap
Fit a number of dish soap into the WC bowl. Allow it to sit for approximately fifteen minutes. The soap may help break down any solids. It’ll furthermore lubricate the bowl and pipes by themselves, making it simpler for the blockage to slip into the drain. Shortly after you use the dish soap, try pouring hot water again (hot, not boiling) into the bowl. Allow it sit again, this time for approximately 30 mins. Just after you provide the water and soap time to unblock, test flushing again. If that continues to haven’t solved the issue, try repeating this approach again.
- Try using Epsom salt
If you happen to have Epsom salt near you, you are in fortune. Flowing Epsom salt into water sparks a chemical reaction that makes the water begin to fizz and bubble. All the fizzing and bubbling can really help in dissolving the clogs. Supply a large amount of Epsom salt into the WC bowl. Allow it to sit for at least 15 minutes, then flush. You can expect very good results after the first flush.
- Try using a wire hanger
This is the most direct option to eliminate the blockage. In case you have tried heat and chemical reactions without results, it is time to reach to try unfolding a wire hanger. Put a wire hanger into the WC bowl, and wiggle it around in the opening. This could be kind of gross dependent on what the blockage covers, therefore you are suggested putting on gloves. Try not to unexpectedly damage the WC bowl while you’re working. Wire hangers can simply scrap up porcelain if you are too rough
After you have unblocked your toilet without any fails, there are two things you need to do. First: go and purchase a flange plunger. Next, find out why your toilet suffers from blockages in the first place. If it happens so many times, perhaps there’s an even more major problem within your plumbing system. If that’s the case, you should get in touch with the pros like Local St.George Plumbers that will take a look at your home’s plumbing and figure out why you have such blockages. A team of professional plumbers will help make sure you will not need to use a plunger for a while
Click here for more info.